Directional Control Valves
25%
Replacement AC200V / AC220V coil for Tokyo Keiki (formerly Tokimec) Flui-Trol DG4M4 Series Directional Control Valves.
- AC200V (50/60Hz) / AC220V (60Hz)
- ±10% Allowable Voltage Tolerance
- Initial Current: 0.18A (60Hz) / 0.21A (50Hz)
NOTE: Delivery is 16-19 weeks.
25%
Replacement AC115V coil for Tokyo Keiki (formerly Tokimec) Flui-Trol DG4M4 Series Directional Control Valves.
- AC115V (50/60Hz)
- ±10% Allowable Voltage Tolerance
- Initial Current: 0.36A (60Hz) / 0.42A (50Hz)
- Holding Current: 0.25A (60Hz) / 0.30A (50Hz)
NOTE: Delivery is 16-19 weeks.
26%
Replacement AC110V coil for Tokyo Keiki (formerly Tokimec) Flui-Trol DG4M4 Series Directional Control Valves.
- AC110V (50Hz/60Hz)
- Holding Current: 0.25A (60Hz) / 0.30A (50Hz)
- Holding Wattage: 15.3W (60Hz) / 18.0W (50Hz)
NOTE: Delivery is 16-19 weeks.
25%
- AC100V (50/60Hz) / AC110V (60Hz)
- ±10% Allowable Voltage Tolerance
- Holding Wattage: 15.3W (60Hz) / 18.0W (50Hz)
- Features resin molded dual frequency (50/60 Hz) two terminal coils.
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
20%
- Solenoid Operated Pressure Regulating Valve Unit
- Max Working Pressure: 21MPa
- Rated Flow: 90L/min (at 0.1MPa min control pressure)
- Pressure Adjustment Range: 0-4MPa
- Pilot Rate Flow: 2L/min
- Pilot Pressure: 10 type (requires 1.2MPa or higher)
- Operating Temperature: 0-60°C (hydraulic oil)
- Gasket Mounting Type
- Solenoid Operated Pressure Regulating Valve Unit
- Max Working Pressure: 21MPa
- Rated Flow: 170L/min (at 0.1MPa min control pressure)
- Pressure Adjustment Range: 0-4MPa
- Minimum Pilot Rate Flow: 2.5L/min
- Pilot Pressure: 20 type (requires 2.4MPa or higher)
- Operating Temperature: 0-60°C (hydraulic oil)
- Gasket Mounting Type
20%
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
- 56 designs are transitioning to the 100 design.
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
