Top Rated Products
- HPX Series General-Use Potentiometer Tuning Sensor
- Scanning Distance: Up to 800 mm
- Response Time: 50 µs
- Power Supply: 12–30 Vdc (10% ripple max.)
- Output Types: NPN and PNP open collector
- Current Consumption: 35 mA max.
- Switching Current: 100 mA max. (output)
- Residual Voltage: 1V max.
- Indicators: Red ‘ON’, Green ‘ON’ (stable), Green ‘BLINK’ (diagnostics)
- Ambient Light Immunity: Incandescent 5,000 lux, Sunlight 20,000 lux.
- Out of Stock Models: Estimated Arrival 2 to 3 Weeks
5%
- High-Accuracy Position Sensor.
- Ultra-high resolution: 0.1 µm for precise measurement.
- Fast measurement cycles: 250 μs, 500 μs, or 1 ms.
- Ultra-thin sensor head: 8 mm, ideal for tight spaces.
- Multi-channel controller: Supports up to 4 sensor heads.
- Versatile communication options: RS-485 (Modbus RTU), MECHATROLINK-III, EtherCAT.
- Sensing range: 10 to 1000 mm (depending on model).
- High repeatability: ±1 µm or less.
- Operating conditions: 0 to 50°C, 30 to 85% RH.
- Protection: IP40, power reverse connection protection.
- Out of Stock Models: Estimated Arrival 3 to 4 Weeks
- Remote Temperature/Humidity Sensor.
- Sensing Range: Temperature -20 to +80°C; Humidity 0 to 100% RH (no condensation)
- Accuracy: Temp ±0.3°C (Pt100); Humidity ±3% RH (30-70% RH at 25°C)
- Output: Temp: JIS Pt100 (3-wire), 1-5Vdc, 4-20mAdc; Humidity: 1-5Vdc / 0-10Vdc, 4-20mAdc
- Power: 24Vdc ±10%
- Protection: IP54, Dielectric Strength 500Vac, Insulation Resistance 20MΩ
- Accessories: Cable tie, sponge pad.
- Out of Stock Models: Estimated Arrival 3 to 4 Weeks
- Heat/Cold Resistant Explosion-Proof Limit Switch.
- Operates in extreme temperatures.
- Flameproof (db) internal switch, increased safety (eb) housing.
- Anti-corrosive aluminum and silicone rubber packing.
- Works with LX700 / VCX-7_0_ switches.
- Electrical Ratings: Up to 3 A at 250 V AC; gold-plated options available.
- Temperature Range: Heat-resistant: −10 °C to +100 °C; Cold-resistant: −40 °C to +60 °C.
- Conduit Options: G½ / M20 / NPT½ and others.
- Out of Stock Models: Estimated Arrival 4 to 6 Weeks
- Die-Cast Safety Interlock Switch
- IP67-rated for dust/water protection
- UL, CSA, CE certified for safety standards
- 10A energizing current, gG fuse for short-circuit protection
- 500V insulation voltage (IEC 60947-1), 300V (UL508)
- Withstands 1,000A short-circuit current
- Mechanical life: 1,000,000+ operations
- Electrical life: 500,000+ operations
- Operates in -25 to +70˚C (-40 to +70˚C storage)
- Impact resistant (100 m/s²), vibration resistant (50 m/s²)
- Reliable in Contamination Degree 3 environments
- Out of Stock Models: Estimated Arrival 4 to 6 Weeks
- For compressed air and nitrogen
- Micro-flow thermal mass-flow sensor
- Aluminum alloy body, Denatured PPO case
- -0.07 to +1.0 MPa operating pressure
- 24 Vdc, 120 mA max. voltage
- 4-20 mA output, 300Ω load
- 50 ms to 1.5 s response time
- IP65 protection, 7-segment display
- Out of Stock Models: Estimated Arrival 4 to 6 Weeks
- Compact Air Mass Flow Sensor
- Accurate Measurement: Converts flow at 20 °C, 1 atm (101.325 kPa).
- Gas Compatibility: For air and nitrogen; clean, dry gas required.
- Quick Response: 300 ms for 95% response.
- Reliable Output: 0.5 to 3.5 Vdc with 1 MΩ load resistance.
- Wide Range: -10 to +60 °C, -100 to +200 kPa.
- Low Power: 5 Vdc, 6 mA consumption.
- Measurement Range: MCS200L001 (0-1 L/min), MCS200L003 (0-3 L/min).
- Out of Stock Models: Estimated Arrival 4 to 6 Weeks
- For use with “DG4M4” Flui-trol Miniature Valves
- Flow restrictor with integrated check valve function
- Fluid type choices include Mineral Oil/Water Glycol (Standard), or Phosphate Ester (F3)
- High precision flow control
- Durable construction
- Reduces actuator speed movement
- Out of Stock Models: Estimated Arrival 16 to 19 Weeks
- Maximum Pressure: 31.5 MPa
- Fluid type choices include Mineral Oil/Water Glycol (Standard), or Phosphate Ester (F3)
- Type: One-way Flow Restrictor with integrated check valve (gasket mounting)
- Designed for high-pressure hydraulic circuits.
- Out of Stock Models: Estimated Arrival 16 to 19 Weeks
- Pressure and temperature compensated for consistent flow.
- Controls very small flows
- Integrated check valve allows free flow in reverse direction
- Reliable and durable Tokyo Keiki quality
- Optimal performance and efficiency
- Ideal for various applications requiring precision flow control.
- Out of Stock Models: Estimated Arrival 16 to 19 Weeks
