Miniature Solenoid Directional Valves

Introducing the DG4M4 Series Directional Valve, Tokyo Keiki

• Compact solenoid directional valve suitable for up to 21 MPa.
• Features resin molded dual frequency coils (50/60 Hz) with two terminals, eliminating the need for coil rewiring.
• Designed for use with standard hydraulic fluids, including mineral oil-based, water glycol-based, and phosphate ester. 
• Miniature size with a wet armature type for efficient operation.

Introducing the DG4M4 Series Directional Valve, Tokyo Keiki

• Compact solenoid directional valve suitable for up to 21 MPa.
• Features resin molded dual frequency coils (50/60 Hz) with two terminals, eliminating the need for coil rewiring.
• Designed for use with standard hydraulic fluids, including mineral oil-based, water glycol-based, and phosphate ester. 
• Miniature size with a wet armature type for efficient operation.

Replacement DC24V coil for Tokyo Keiki (formerly Tokimec) Flui-Trol DG4M4 Series Directional Control Valves.

• DC24V (50/60Hz) 
• ±10% Allowable Voltage Tolerance
• Holding Wattage: 13.40W (60Hz) / 14.80W (50Hz)

NOTE: Delivery is 16-19 weeks.

Introducing the DG4M4 Series Directional Valve, Tokyo Keiki

• Compact solenoid directional valve suitable for up to 21 MPa.
• Features resin molded dual frequency coils (50/60 Hz) with two terminals, eliminating the need for coil rewiring.
• Designed for use with standard hydraulic fluids, including mineral oil-based, water glycol-based, and phosphate ester. 
• Miniature size with a wet armature type for efficient operation.

Introducing the DG4M4 Series Directional Valve, Tokyo Keiki

• Compact solenoid directional valve suitable for up to 21 MPa.
• Features resin molded dual frequency coils (50/60 Hz) with two terminals, eliminating the need for coil rewiring.
• Designed for use with standard hydraulic fluids, including mineral oil-based, water glycol-based, and phosphate ester. 
• Miniature size with a wet armature type for efficient operation.

Introducing the DG4M4 Series Directional Valve, Tokyo Keiki

• Compact solenoid directional valve suitable for up to 21 MPa.
• Features resin molded dual frequency coils (50/60 Hz) with two terminals, eliminating the need for coil rewiring.
• Designed for use with standard hydraulic fluids, including mineral oil-based, water glycol-based, and phosphate ester. 
• Miniature size with a wet armature type for efficient operation.

• Replacement actuator for EP Series
• Tokyo Keiki (formerly TOKIMEC)

• Replacement actuator for EP Series
• Tokyo Keiki (formerly TOKIMEC)

• Compact Air Mass Flow Sensor
• Accurate Measurement: Converts flow at 20 °C, 1 atm (101.325 kPa).
• Gas Compatibility: For air and nitrogen; clean, dry gas required.
• Quick Response: 300 ms for 95% response.
• Reliable Output: 0.5 to 3.5 Vdc with 1 MΩ load resistance.
• Wide Range: -10 to +60 °C, -100 to +200 kPa.
• Low Power: 5 Vdc, 6 mA consumption.
• Measurement Range: MCS200L001 (0-1 L/min), MCS200L003 (0-3 L/min).
• Out of Stock Models: Estimated Arrival 4 to 6 Weeks 

• Compact Air Mass Flow Sensor
• Accurate Measurement: Converts flow at 20 °C, 1 atm (101.325 kPa).
• Gas Compatibility: For air and nitrogen; clean, dry gas required.
• Quick Response: 300 ms for 95% response.
• Reliable Output: 0.5 to 3.5 Vdc with 1 MΩ load resistance.
• Wide Range: -10 to +60 °C, -100 to +200 kPa.
• Low Power: 5 Vdc, 6 mA consumption.
• Measurement Range: MCS200L001 (0-1 L/min), MCS200L003 (0-3 L/min).
• Out of Stock Models: Estimated Arrival 4 to 6 Weeks