Hydraulics
11%
- Introducing the P16V-RSTU-30-CMC-21-J (N5.5) piston pump from Tokyo Keiki (formerly Tokimec), redesigned to offer lower noise levels by an average of 5dB (as compared to older designs).
- With a body that is 60mm (2.3 inches) narrower the weight has been reduced by almost 9 lbs all while maintaining the same connection points.
- Direct replacement for models P16VMR-10-CMC-20-S121-Jand P16V-RSG-11-CMC-10-S121-J
- Simplifies Hydraulic Circuits: Equipped with a pressure compensator, the P16V-30 series eliminates the need for relief valves, streamlining hydraulic circuits and increasing overall efficiency.
- Our specialized cylinder bore surface treatment enhances pump life and ensures stable operation even in challenging environments with contamination risks.
- Swash plate design
- Flange mounting (Foot bracket option)
- Right (R) or left (L) rotation
- Single side displacement
- SAE O-ring seal (G option)
- Various control options
- Maximum Displacement Adjustment (*C)
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
- Poppet valves control one-way flow in hydraulic systems.
- Cartridge valves enhance design for bidirectional flow control.
- Manifold blocks reduce leakage in hydraulic systems.
- Offers high flows and efficiency.
- Advantages: design flexibility, lower cost, improved reliability.
- Considerations: high flow rates, pressure, compact size.
- Cartridge valves optimize system performance with easy customization.
20%
- Choose between standard hydraulic fluid (Mineral Oil) or Water Glycol (F11)
- Mounting bracket (F) is available for mounting flexibility & stability
- Maximum Displacement: 70cm³/rev (33.3 GPM)
- Maximum Operating Pressure: 21MPa (3,050psi)
- Speed Range: 600-1800 (rpm)
- Rotation: Right-hand (R) & Left-Hand (L) Rotations available for flexibility
- Max Displacement Customization
25%
- Angle type check valves: Gasket mounting ensures leak-free operation.
- Valve opening adjuster options: S51 (C2G-805) for precise control.
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Tokyo Keiki brand: Trusted for excellence and reliability in hydraulic systems.
- Elevate your performance with Tokyo Keiki C2G-805 Series.
- Enables air bleed air of hydraulic circuit.
- Closes once circuit pressure exceeds 0.14 MPa
- Special feature: S4 closure with only 0.3 L/min flow
- Maximum working pressure: 21 MPa
- Tokyo Keiki: Your trusted source for advanced hydraulic solutions
- Boost system performance with the ABT valve.
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
- Tokyo Keiki DG4VL-5 Series: Temperature-compensated flow control valve
- Energy-saving solenoid, solid-state relay for PLCs
- Supports phosphate ester fluid, durable wet armature design
- ISO 4401-AC-05-4-A dimensions, left-hand build option
- Plug-in solenoids (G ½), DC24V, handles 20.6 MPa back pressure
Onsale Products
$ 3,048.00
$ 102,449.00
$ 102,449.00
Top Rated Products
$ 33,050.00
$ 102,449.00
